Other

$3.00 - $14.00
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
- Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

$3.94 - $18.64
Aluminum headset stack spacers precision-cut to ensure proper headset function.
- Precision-cut for proper function
- Inner Diameter: 28.9mm
- Outer Diameter: 34.4mm
- Precision-machined aluminum

$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

$10.45 - $20.48
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag

$40.00
This ingenious device allows you to get back home should you break your hanger out on the road or trail. Simply remove your broken hanger, derailleur and QR skewer nut. Put the QR skewer through the Emergency Hanger, remove the spring and re-attach the nut. Secure the QR nut and skewer down tightly. Re-attach the derailleur and away you go! In most cases you should have the ability to shift throughout half (or more!) of your rear cassette range. Sorry, this hanger is designed as a quick, Emergency fix to get you back home and is not designed for long term use. - CNC machined 6061 aluminum - Black anodized finish

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M5x10 Flat Head Screws

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - Cannondale Hanger #KP284

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Attaches to frame with a special low flat head screw M6-1.0 (RockyMountain part #180487-010) - Fastener not Included - For Thru Axle - Replaces Rocky Mountain Part #1092020 (Hanger #9)

$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913015-003 - Attaches to frame with (1) M4x8 flat head screw (sold separately) - CNC machined 6061 aluminum - Black anodized finish - Note: This hanger is not the same as DROPOUT-274, which uses an M3 flat head screw

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$3.41 - $4.46
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers.
- Thread: M5-0.8
- Overall Length: 8mm
- Material: Steel
- Use with 3mm hex wrench
- Bag of 5

$21.00
Replacement spacer pack for Wheels Mfg. 22/24mm (SRAM GXP) bottom brackets. Bearings sold separately. Pack Includes: - (1) - Silicone Dust Seal, 24mm ID Drive Side - (1) - Silicone Dust Seal, 22mm ID Non-drive Side - (1) - 24MM Wave Washer - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer

$9.99
Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

$9.99
- Converts 140 post mount to 160 or 160 post mount to 180mm
- Simplified and lower profile design allows for the use of only 2 bolts instead of 4
- Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

$140.00
- Allows easy, tool-free adjustment of spring rate
- Includes spring, adjuster, and 5 performance adapters
- Lightweight (highest grade steel allows less material)
- See https://sprindex.com/pages/compatibility for fitment details

$9.00
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack

$13.99
- Wears and functions like other links on the chain
- SIL-TEC surface treatment
- Tool free installation possible
- TL-CN10 is available as SM-CN900-11
- Single use

- Replacement pins for 9-speed Shimano chains
- Compatible with CN-7700/HG92 chains
- 3 replacement pins per pack

$26.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$73.00
- Lever Assembly, Aluminum lever Gen 2, Black (assembled, no hose, and includes barb and olive), Guide R

$45.00
Original equipment hydraulic hoses for no-compromise brake performance.
- Fits All B (2016+) Versions of Guide RSC RS R
- Hose length: 2000mm

$17.99
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$17.00 - $17.99
Power links provide tool free chain assembly.
- Chain Compatibility: SRAM
- Reusable: No

$17.00
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

$26.00 - $42.00
The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite.
- 34g lighter than Maxle Lite
- Easy installation with a 6mm Allen wrench

$16.95
Designed specifically for the Ritchey WCS Carbon Fork, this compression device secures the stem and headset for any fork with a carbon steerer.
- Compression plug for carbon 1-1/8" steerers
- Top cap fits 1-1/8" stems
Page 1 of 2
Next page