$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Thomson's Elite X2 Road Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X2 combines exceptional strength with light weight for a stiff stem and total control on all your rides. It has a two-bolt clamp design that's just as strong as four-bolt designs thanks to Thomson's interlocking interface and it also cuts down on the weight. Plus, the stem's low 36mm stack height gives you more options for customizing your position. And, thanks to their reversible graphics, your X2 looks great whether you run a positive or negative rise.
$40.00 - $45.00
Salsa's Guide Stem is lightweight, durable, and provides excellent steering response on the road or trail. - Bead-blasted, then anodized - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation - Stack Height: 40
- Fully CNC machined - Featuring an oversize center bore - Extensive machining and external webbing to maximize structural strength and stiffness and minimize weight
$99.99 - $104.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
$27.99 - $29.99
Comfort is king when you dial in your riding position with Profile's Boa Quill Stem. This light and durable welded-aluminum stem features a 20- or 40-degree rise and a secure two-bolt faceplate that makes installing the handlebars a breeze.
A little H2O is a crucial part of every ride! This sweet stem is made of 6061-T6 aluminum for a light, strong ride. Cold 3D forging adds strength and a nice finish.
MSW 17° stems raise the bar—literally—for what riders can expect from an inexpensive stem. Rigorously tested to ISO-4210 Mountain qualification standards. - Tested to ISO 4210 Mountain standards - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate for easy installation
Kalloy's 820 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure.
Kalloy's 822 Adjustable Stem lets you set up your handlebars exactly where you want them using just an allen wrench! With a 0-60° rise, you're sure to find a position that puts you comfortably in control. Its 4-bolt handlebar clamp makes bar changes easy and secure. - For quill-style steerers
$29.99 - $35.00
Dimension 31.8 Stems are fully forged 6061-T6 aluminum stems that have a 4-bolt handlebar clamp. - 31.8mm can be used with 26.0 bars with additional shim (SM5317) - Dimension stems are not intended for use with carbon handlebars or carbon steer tubes - Weight: 130g-180g
$30.00 - $34.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
Chromag's Ranger stem is carved by technical artists using futuristic robot machines for a strong, light, and elegant piece of heavy-duty bike ordnance. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end. - CNC machined from premium alloy optimized for strength and fatigue resistance - As light as 140g - 0 degree rise, the way it should be - 31.8 bar clamp
Strong, light and elegant. Chromag's longest running stem, the Ranger, has a refined body shape that represents their own advancement in 3D modelling and CNC profiling. The Ranger is stronger and stiffer for today’s increased demands with blended body features to increase performance with a more fluid look. The Ranger evolves with the same physical fundamentals, more flow, and increased strength. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end.
$40.00 - $65.00
Cannondale's 1.5-inch Stem comes in plenty of options to fine-tune the fit on your bike. This stem works with larger 1.5-inch steerers, frequently found on Cannondale's front-suspension bikes. Using Cannondale's One-Piece-Integration process, it's made of a single piece of durable, lightweight 2024 aluminum.
Whisky's No.7 Mountain stems offer a stout connection for modern mountain bars. They match the simple, clean aesthetic of other Whisky cockpit components. - Bead-blasted, then anodized, finish - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design for easy installation
$85.00 - $95.00
Velo Orange Cigne Stem gets its name from the French word for swan. The shape is inspired by the old gooseneck LD stems by Ibis and Cunningham, but with a few accommodations for modern bike needs. 1 1/8" threadless and 31.8mm handlebar clamp with a removable faceplate. With 145mm of vertical height from the base of the stem to the center of the clamp, it's pretty useful for getting your handlebars up high without using a ton of spacers. - Star-nut should be approximately 1cm from the top of the steerer tube - Minimum 55mm of steer tube required - Not compatible with carbon steerer tubes - No top cap needed. Stem includes tension bolt
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
BMX riders need tough components, which is why Thomson developed their BMX Stem. It can handle whatever you can dish out thanks to being constructed from a solid bar of 7000-series aluminum. Plus it's anodized to prevent corrosion and has tough heat-treated bolts. You'll also appreciate the 50mm-wide clamp for a super-secure handlebar and enhanced control, while Thomson's patented undercut around the bars provides even more stability. And, if you run a Gyro, Thomson's got you covered, too, thanks to the built-in spacer that eliminates the need for a separate, loose spacer. And, at only 255 grams, the BMX stem keeps your rig light for the toughest tricks and longest rail rides.
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
- Keep your steerer tube long without using lots of headset spacers - The classic look of a road race quill stem with a modern threadless headset - Polished silver with laser etch logo - 75 degree angle (-15 deg rise) - Clamp Diameter: 31.8mm (includes shims for 26.0mm handlebars) - Steerer Diameter: 1-1/8"
- 3-D forged aluminum with 4-bolt bar clamp - 83 or 7 degree flip flop design. 137g (80mm) - Includes shim for 1" threadless steerers
The Guide Trail Stem translates your handlebar input into precise trail movements. It’s an ideal choice for modern trail bikes that have a long front center and wide bars. The Guide Trail Stem is lightweight, durable, and available in a variety of sizes to suit rider preferences. - AL-6061-T6 aluminum construction - 3D-forged for increased strength, then CNC-machined - 4-bolt faceplate design - 35.0mm bar clamp - 28.6mm stem clamp - 40mm stack height - Bead-blasted, then anodized, finish
Ritchey's 4-Axis Adjustable Stem features a precision 3D-Net shaped forged shaft that interconnects with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. - Stainless steel bar and steerer clamp bolts - Stack Height: 40 - Weight: 219g
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
- Bar Clamp Diameter: 31.8mm - Material: Alloy - Stem Angle: +17 degrees, -17 degrees - S.H.I.S. Stem Clamp Diameter: 31.8mm
Page 1 of 3 Next page